LAB GRUPPEN FP10000Q เครื่องขยายเสียง 4 แชนแนล 10,000 วัตต์

รหัสสินค้า : FP10000Q

LAB GRUPPEN FP10000Q เครื่องขยายเสียง 4 แชนแนล 10,000 วัตต์

• 10,000 Watt, 4-channel amplifier with up to 2,500 Watts output per channel and NomadLink network for monitoring and control
• Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
• 4 x 2,500 Watts into 2 Ohms, 4 x 2,100 Watts into 4 Ohms, 4 x 1,300 Watts into 8 Ohms, 4 x 660 Watts into 16 Ohm
• Proven and reliable Class-TD output stage delivers Class A/B audio quality with Class D efficiency
• Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
• Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
• Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
• Efficient Intercooler copper cooling system dissipates more heat for extended peak output
• 4 x balanced analog audio inputs on Neutrik XLR* connectors
• 4 NL4 Neutrik speakON* output connectors
• Removable dust filter grilles for increased air circulation
• Rugged 2U rackmount chassis for durability in touring applications
• 10-Year Warranty Program*
• Designed and engineered in Sweden

General

Number of amplifier channels4

Peak total output all channels driven10000 W

Peak output voltage per channel150 V

Max output current per channel50 A peak

Max output power (all channels driven)

2 ohms2500 W

4 ohms2100 W

8 ohms1300 W

16 ohms660 W

Max output power bridged

2 ohmsNot recommended 1

4 ohms5000 W

8 ohms4200 W

16 ohms2600 W

Performance

THD 20 Hz - 20 kHz at 1 W<0.1%

THD at 1 kHz and 1 dB below clipping<0.05%

Signal to Noise Ratio>112 dBA

Channel separation (Crosstalk) at 1 kHz>70 dB

Input impedance20 kOhm

Common Mode Rejection (CMR)>54 dB, 20 Hz - 20 kHz

Gain, Sensitivity and Limiters

VPL, selectable per ch150, 121, 101, 83, 70, 56, 47, 38 V

VPL, when bridged 2300, 242, 202, 166, 140, 112, 94, 76 V

Voltage Peak Limiter mode (per ch.)Hard / Soft

Amplifier gain selectable (all channels) – rear-panel switches 223, 26, 29, 32, 35, 38, 41, 44 dB

Default gain35 dB

Level adjustment (per channel)Front-panel potentiometer, 31 position detented from -inf to

Connectors and Buttons

Output connectors (per ch.)Neutrik speakON

Input connectors (per ch.)3-pin XLR, electronically balanced

Output bridge modeA+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source

NomadLink networkOn board, 2 x RJ45 connectors IN and OUT

Intelligent fans (on/off)Yes, depending on presence of output signal

Power on/off and Remote enable on/offIndividual switches on front-panel

CoolingDual fan, front to rear airflow, no filter required, temperature controlled speed

Front-panel user interface

CommonNomadLink Network; Power Average Limiter (PAL)4; Power on

Per channelSignal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power

Operating voltage, 230 V / 115 V nominal 3130-265 V / 65 -135 V

Minimum power-up voltage, 230 V / 115 V171 V / 85 V

Power Average Limiter (PAL) 4Yes

Soft-start / Inrush Current DrawYes / max. 5 A

Mains connector230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

Dimensions

DimensionsW: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)

Weight

Weight12 kg (26.4 lbs)

Finish

FinishBlack painted steel chassis with black painted steel / aluminum front

Approvals

ApprovalsCE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC