TASCAM US-1x2HR | ออดิโออินเตอร์เฟส High-Resolution USB Audio Interface (2 in / 1 mic, 2 out)

รหัสสินค้า : TASCAM US1x2HR

TASCAM US-1x2HR ออดิโออินเตอร์เฟส High-Resolution USB Audio Interface (2 in / 1 mic, 2 out)

   Whether you're tracking away from home or cutting demos on the road, the TASCAM US-1x2HR USB-C audio interface (PC/Mac/iOS) puts rich 192kHz audio and super-low-latency at your fingertips. The TASCAM US-1x2HR's onboard Ultra-HDDA mic preamp gives you 57dB of clean gain to capably drive most dynamic mics and onboard +48V phantom power to support your studio condensers. You also get a TRS/TS 1/4-inch input with Line/Inst selector to simultaneously capture a rhythm guitar, bass, or keyboard as you track vocals. Best of all, the TASCAM US-1x2HR delivers all of these features over USB bus power — just a single USB-C cable (included) from your laptop to your interface is all you need for power and connectivity. As for monitoring, the TASCAM US-1x2HR gives a 1/4-inch headphone out and stereo RCA line outs, each with independent level controls so you can mix projects on loudspeakers or your favorite studio cans. There's even an RCA input around back for interfacing with DJ gear and vintage/prosumer electronics. Making music on the move? For quality and usability, Millionhead stands behind the TASCAM US-1x2HR USB-C audio interface.

1 X ULTRA-HDDA MIC PREAMP

   The TASCAM US-1x2HR employs an Ultra-High Definition Discrete Architecture (Ultra-HDDA) mic preamp design that delivers audio with extremely low self-noise to capture every detail of your musical performances. With one preamp, the US-1x2HR is ideal for solo singer/songwriters. You also get a TRS/TS 1/4-inch jack, so you can easily track instruments. There's even an unbalanced RCA stereo input around back for your consumer electronics.

SUPPORTS SAMPLE RATES UP TO 192KHZ

   Capturing audio in future-resistant 24-bit/192kHz quality is no problem when you've got the TASCAM US-1x2HR in tow. Higher sample rates means potentially greater top-end detail on vocals, acoustic guitars, and more.

SUPER-LOW LATENCY

   High levels of latency — the time it takes for an audio interface to convert your analog signal to digital as it enters your computer and back again in the form of sound — can render even the best interfaces practically unusable. Fortunately, this is no concern with the TASCAM US-1x2HR. The latest drivers give you latency as low as four samples over its rock-solid USB-C connection. In other words, you can monitor yourself through headphones with no trace of delay as you pour your heart into a performance.

SOFTWARE BUNDLE INCLUDED

  Whether you're new to digital recording or not, the TASCAM US-1x2HR's included software bundle is a major value add. This bundle includes licenses to Cubase LE (Mac/PC) and Cubasis LE (iOS), two great platforms for capturing music on the move. Cubase LE provides a cutting-edge music production studio, giving users what they need to get started creating music. Cubasis LE is a compact version of Cubase for your iPad, providing the same look as its bigger sibling.

FEATURES:

• Mac, PC, and iOS compatible USB-C interface
• Sleek and modern design
• Rock-solid recording at home or on the road
• Captures audio in sample rates up to 192kHz
• Super-low latency — as low as 4 samples
• Bus powered — a single USB-C cable supplies power and connectivity from a laptop
• Ultra-HDDA microphone preamplifier with 57dB of gain
• +48V phantom power for condenser microphones
• 1/4-inch jack with Line/Instr switch — great for capturing a guitar, bass, or synth as you track vocals
• Stereo unbalanced RCA inputs for your DJ gear or vintage electronics
• Stereo unbalanced RCA line outputs to feed your studio monitors or other sources
• Headphone output with volume control provides zero-latency monitoring while you record
• Power supply included
• Includes licenses for Cubase LE and Cubasis LE

 Specs

Form FactorTabletopDisplayNoneChannels of I/OAnalog:

2 Inputs / 2 OutputsMax Sample Rate/Resolution192 kHz / 24-BitNumber of Mic Preamps1Input Level Adjustment2 x KnobSolo/MuteNonePadNoneHigh-Pass FilterNoneExpansion SlotsNone

Connectivity

Analog Audio I/O1 x XLR 3-Pin Balanced Mic Input (Front Panel)

1 x 1/4" TRS Balanced/Unbalanced Line/Hi-Z Input (Front Panel)

1 x Stereo RCA Coaxial Unbalanced Line Input

1 x Stereo RCA Coaxial Unbalanced Line Output

1 x 1/4" TRS Unbalanced Headphone Output (Front Panel)Phantom Power+48 V, Selectable On/OffDigital Audio I/ONoneHost Connection / USB1 x USB Type-C (USB 2.0)USB (Non-Host)1 x Micro-USB (Power Input)Sync I/ONoneNetwork I/ONoneMIDI I/ONoneWireless ConnectivityNoneMemory Card SlotNone

Performance

Frequency ResponseMic Inputs:

20 Hz to 20 kHz +0/-0.4 dB (at 44.1/48 kHz, JEITA)

20 Hz to 40 kHz +0/-0.4 dB (at 88.2/96 kHz, JEITA)

Line Inputs:

20 Hz to 20 kHz +0/-0.3 dB (at 44.1/48 kHz, JEITA)

20 Hz to 40 kHz +0/-0.3 dB (at 88.2/96 kHz, JEITA)

Line Outputs:

20 Hz to 20 kHz +0/-0.4 dB (at 44.1/48 kHz, JEITA)

20 Hz to 40 kHz +0/-0.4 dB (at 88.2/96 kHz, JEITA)Gain/Trim RangeMic Inputs:

58 dB

Line/Hi-Z Inputs:

45 dBMax Input LevelMic Inputs:

+9 dBu

1/4" Line Inputs:

+20 dBu

1/4" Hi-Z Inputs:

+3 dBV

RCA Line Inputs:

+6 dBVMax Output LevelLine Outputs:

+6 dBVHeadphone Output Power18 mW per Channel into 32 Ohms (0.1% THD)ImpedanceMic Inputs:

2.4 Kilohms

1/4" Line Inputs:

10 Kilohms

1/4" Hi-Z Inputs:

≥ 1 Megohm

RCA Line Inputs:

10 Kilohms

RCA Line Outputs:

100 OhmsSNRMic Inputs:

109 dB (A-Weighted, Min Gain)

Line Inputs:

105 dB (A-Weighted, Min Gain)

Line Outputs:

110 dB (A-Weighted, Max Gain)THD+NMic Inputs:

0.0013% (1 kHz, Min Gain)

Line Inputs:

0.0027% (1 kHz, Min Gain)

Line Outputs:

0.0015% (1 kHz)Crosstalk≥ 95 dB (1 kHz)EIN-128 dBu (150-Ohm Source, Max Gain)

Digital Audio

Sample Rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHzSample Rate ConversionNoneBit Depths24-BitSync SourcesInternal

Compatibility

OS CompatibilitymacOS 10.13 / 11 or Later

Windows 7 or Later

iPadOS 13 or Later

iOS 11 or LaterIncluded SoftwareCubase LECompatible Software (Not Included)Any Core Audio (Mac) Compliant SoftwareIncluded Plug-InsVirtual Instruments:

SampleTank SESupported Drivers/API & Plug-InsCore Audio (Mac)

ASIO

WDMProcessor Requirement2 GHz or BetterRAM Requirements2 GBMobile Device CompatibilityiPad

iPhoneRequired HardwareAvailable USB 2.0 Port

USB Cable (Included)Internet ConnectionRequired for Registration, Software/Driver Download

Power

Power RequirementsAC/DC Power Adapter (Not Included) or USB Bus PowerAC/DC Power Adapter5 VDC at 700 mA (Not Included)Power Consumption1.8 W

Physical

Anti-Theft FeaturesKensington Security SlotOperating Temperature41 to 95°F / 5 to 35°CDimensions5.7 x 4.7 x 2.2" / 14.6 x 12 x 5.5 cm (Including Controls and Protrusions)Weight1.3 lb / 0.6 kg