PreSonus CDL12 ตู้ลำโพงไลน์อาร์เรย์ 2 ทาง ขนาด 12 นิ้ว 2,000 วัตต์ มีแอมป์ในตัว

รหัสสินค้า : PreSonus CDL12

PreSonus CDL12 ตู้ลำโพงไลน์อาร์เรย์ 2 ทาง ขนาด 12 นิ้ว 2,000 วัตต์ มีแอมป์ในตัว

A unique look with a unique result

Each CDL12 consists of eight 2-inch drivers aligned in a segmented circular-arc high-frequency array centered in front of a 12-inch woofer. The output of the low-frequency driver travels from the same acoustic axis as the high-frequency array so that the pattern always radiates from the center of the CDL12. This is true whether the CDL12 is used individually on a tripod speaker stand or as part of an acoustically coupled vertical array with up to six enclosures. Because of this, the CDL12 avoids the near-field anomalies that can interfere with the sound quality of a traditional line array. This makes the CDL12 ideally suited for a broader range of venue sizes, creating a far-field response almost immediately as the sound is projected from the center of the enclosure.

Symmetrical dispersion matters.

Traditional line array loudspeakers typically place a high-frequency horn on one side of the enclosure and a woofer on the other. To obtain a symmetrical image with those loudspeakers, you'd have to flip one over—something they aren't designed to do in the first place—and you'd still have phase issues. With the CDL12, the eight 2-inch high-frequency drivers arc over a single 12-inch woofer, comparable to the coaxial driver configuration found on top studio monitors. The result is better sonic coherence across the entire venue, with no anomalies to compensate for via time-consuming room correction. Regardless of how many CDL12s you stack, you're working with a shared acoustic axis—and non-turbulent sound propagating throughout the room.

Scalable vertical coverage.

The CDL12’s hybrid point source/line array design delivers focused sound with consistent SPL coverage both on- or off-axis, making it an excellent choice for mobile and installed applications. Rigging CDL12 enclosures is made easier, thanks to integrated pin-loaded rigging hardware. A dual-angle pole mount is provided, supporting the use of one or two enclosures when pole mounted on a tripod stand, or atop the companion CDL18s subwoofer, allowing the system to adapt to varying audience sizes. When vertically arrayed for suspended applications, up to five CDL12 enclosures can be flown beneath one or two CDL18s subwoofers. When flown without a subwoofer, six CDL12 loudspeakers can be arrayed to create a truly symmetric 120˚ x 120˚ design.

Onboard processing power.

The CDL12’s integrated PDA-1000 500W x 500W Class D power amplifier features onboard DSP presets to facilitate and simplify arrayed configurations. For more advanced applications, each CDL12 can be connected to a standard LAN network and remotely controlled using Worx Control software for macOS® and Windows®. When combined with the CDL12, Worx Control provides speaker-management tools that include compression, limiting, and 800 ms of delay. An 8-band EQ with individually selectable filters (High Pass, Low Pass, High Shelf, Low Shelf, Notch, All Pass, Band Pass) is also provided to compensate for room anomalies. Speakers can be grouped and managed individually or together. Performance monitoring indicators allow you to monitor temperature and signal levels remotely.

Dante® spoken here.

The locking Ethernet connection on the CDL12’s integrated PDA-1000 power amplifier also provides audio networking capability via Dante. Dante’s multi-channel digital media networking technology delivers near-zero latency and synchronization and has been adopted by many pro-audio manufacturers, facilitating the CDL12 loudspeaker’s interoperability with a wide range of equipment.

Specifications

Acoustic Performance

 ConfigurationActive 2-wayFrequency Response (-3 dB)48 Hz – 18 kHzFrequency Response (-10 dB)42 Hz – 19 kHzNominal Coverage (-6 dB)120° x 20° per enclosureMaximum Peak SPL131 dBCrossover Frequency420 HzTransducer

 LF Transducer12” (2.5” voice coil)HF Transducer8 x 2” (1” Voice Coil)Amplifier

 TypeClass DTotal Power Output2000W Peak, 1000W Program (500W RMS)LF Power1000W Peak, 500W Program (250W RMS)HF Power1000W Peak, 500W Program (250W RMS)CoolingFree air convectionRated THD<0.05% (20 Hz - 20 kHz)Dynamic Range119 dB (A-weighted)Bandwidth20 Hz - 20 kHzMains ConnectionpowerCON™ In and OutConnections and Controls

 Input Channels1 LineInput Connector Types1 XLRLine Input Impedance40 kΩMaximum Input+4 dBuOutput ConnectorDirect Line Out (XLR)NetworkingDante® (Audio and Control), Control (only) via Locking EthernetControlsPreset Select

HPF On/OffIndicatorsOver Temperature, Signal, -3 dB, Limiter, Clip, Network StatusDSP

 EffectsCompression, Limiting, Delay, 8-band EQ and preset selection via WorxControlHPF90 Hz, 4th-order ButterworthBit Depth24-bitSample Rate48 kHzEnclosure

 Material15 mm Eucalyptus plywoodFinishChemline™ PolyureaGrillePowder-coated steelDimensions (HxWxD)18.6” x 20.8” x 17.5” (473 mm x 529 mm x 444.5 mm)Unit Weight65 lbs. (29.5 kg)Safety

 Amplifier ProtectionOver-current, DC, over/under-voltage, over-temperature, high frequencyTransducer ProtectionLimiterPower

 AC Power Input90-260V~, 50-60 HzAC Power Consumption (1/8 Power)4.2 AmpsSuspension Mounting

 Rigging PointsIntegrated Rigging (10:1 load)MountingDual-position pole mount (0° and 10°) 35 mmOptional Accessories

 RiggingCDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging SlingOtherCDL12-Tote Tote Bag