JBL Control25-1-WHตู้ลำโพงติดผนัง ขนาด 5 นิ้ว

รหัสสินค้า : Control25-1-WH

รายละเอียดสินค้า

JBL Control25-1-WHตู้ลำโพงติดผนัง ขนาด 5 นิ้ว

คุณสมบัติ

• Components:
• • 5-¼” woofer with woven fiberglass cone
• • 3/4” PEI diaphragm tweeter with fluid cooling
• Contemporary, high-design appearance
• Built-in InvisiBall® mounting hardware*, plus available U-bracket
• Weather resistant enclosure and transducers
• Wide 100° x 100° coverage
• 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
• High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

สเปค

Frequency Range (-10 dB)60 Hz to 20 kHz

Frequency Response (+/-3 dB)85Hz – 17 kHz

Power Rating200 W Continuous Program (2 hrs)

100 W (400W peak), Continuous Pink Noise (2 hrs)

75 W (300W peak) Continuous Pink Noise (100 hrs)

Maximum Input Voltage25.3 V RMS (2 hrs), 50.6 V peak

Maximum SPL110 dB ave. Continuous Pink Noise (116 dB peak)

Sensitivity90 dB, 1W/1m (ave. 100 Hz – 10 kHz)

Coverage Angle100° x 100°

Directivity Factor (Q)6.04 (averaged 1kHz – 16kHz)

Directivity Index (DI)7.6dB (averaged 1kHz – 16kHz)

Nominal Impedance8 ohms (THRU setting)

Crossover Type

2nd order low-pass, 3rd order high-pass

Transformer Taps

70V: 30W, 15W, 7.5W, 3.7W

100V: 30W, 15W, 7.5W

Insertion Loss <0.94 dB at any tap setting

Thru Setting: 8Ω nominal

Recommended Protective

High-Pass

60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).

Low Frequency Driver

135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.

High Frequency Driver

19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.

Enclosure Material

High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.

Grille

Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.

Installation

InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.

Environmental

IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.

Termination

Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.

Agency Rating

ROHS-compliant; Transformer UL Recognized per UL1876

Colors

Black (RAL9004) or white (-WH, RAL9016)

Dimensions (H x W x D)

243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.

Net Weight

3.4 kg (7.5 lbs)

Shipping Weight

8.16 kg (18 lbs) for the pair-pack (for 2 speakers)

Included Accessories

InvisiBall™ wall-mounting system), 6 mm x 100 mm hex key

Optional Accessories

MTC-25UB-1 – Yolk-type U-bracket (&-WH)

MTC-25WMG-1 – WeatherMax grille with backing (&-WH)

MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)