YAMAHA DZR10-Dตู้ลำโพง 2 ทาง 10 นิ้ว 2,000 วัตต์ มีแอมป์ขยายในตัวพร้อมระบบ Dante

รหัสสินค้า : DZR10-D

รายละเอียดสินค้า

YAMAHA DZR10-D | ตู้ลำโพง 2 ทาง 10 นิ้ว 2,000 วัตต์ มีแอมป์ขยายในตัวพร้อมระบบ Dante

  The Yamaha DZR10-D is a Dante-equipped, 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 10″ woofer and 2″ compression driver, which combine to provide a frequency range of 44 Hz to 20 kHz (-10 dB) with a maximum SPL of 137 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.

   The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR10-D is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multi-band compressor that ensures the DZR10-D’s sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.

   The rear panel offers two combo XLR-1/4″ inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The DZR10-D is equipped with an additional panel with two etherCON connectors (2-in/2-out) for interfacing with other Dante compatible equipment such as other speakers and Yamaha’s CL/QL/TF digital mixing consoles. The Yamaha DZR10-D ships with a standard IEC power cord.

Features:

• 2-way powered loudspeaker with a 2” HF and a 10″ LF
• Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
• High power 2000W Class-D amplifier module
• 96kHz DSP and FIR filter for true high-resolution sound with super low latency
• Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
• Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility
• Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
• D-Contour and highly reliable protection circuits
• Floor monitoring setting
• Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
• Optional speaker cover(SPCVR-DZR10)
• Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement

Specifications

System Type2-way, bi-amped powered speaker, bass-reflexFrequency Range44 Hz to 20 kHz (-10 dB)Coverage AngleH/V: 90 x 60° (rotatable)

Floor Monitor: 50°ComponentsLF: 10.0″ / 254.0 mm cone, 3.0″ / 76.2 mm voice coil, neodymium magnet

HF: 1.0″ / 25.4 mm throat compression driver, 2.0″ / 50.8 mm voice coil, titanium diaphragm, neodymium magnetCrossover1.8 kHz (FIR-X)Sample Rate96 kHz and FIR filterSPLMaximum Output Level (on axis, 3.3′ / 1 m): 137 dBPower RatingDynamic: 2000 W (LF: 1000 W, HF: 1000 W)

Continuous: 1300 W (LF: 920 W, HF: 380 W)ConnectorsAnalog In: 2 x combo XLR-1/4″ / 6.35 mm

Line Level: Maximum +24 dBu

Input Impedance: 20 kOhmsAnalog Out: 2 x XLR

Ch1: Thru (fix)

Ch2: Thru or DSP out Digital I/O

Dante: 2 x etherCON Cat 5e (daisy chain), 2 in / 2 out

Fs: 44.1, 48, 88.2, 96 kHz Remote control

1000BASE-TUSBUSB 2.0: Host 5 V 500 mA, for USB memory DATA storage/loadAC InputAC Input Connector: 1 x IEC AC inlet (V-Lock)Amplifier TypeClass-DCoolingFan cooling, variable speedsPower ConsumptionIdle: 45 W

1/8 Power: 150 WHandles2 x aluminum die-castRigging Points8 x M10

2 x M8Enclosure MaterialPlywood, durable Polyurea coating, blackPole Socket2 x Φ 1.4″ / 35.0 mm (0° or -7°)Dimensions (W × H × D)12.4 x 21.1 x 13.6″ / 315.0 x 535.9 x 345.4 mmWeight39.5 lb / 17.9 kg