YAMAHA PX8เพาเวอร์แอมป์ Class-D
รหัสสินค้า : PX8
ราคา |
33,200.00 ฿ 39,000.00 ฿ (-15%) |
จำนวนที่จะซื้อ | |
ราคารวม | 33,200.00 ฿ |
สินค้าไม่เพียงพอ
สินค้าหมด
รายละเอียดสินค้า
YAMAHA PX8 | เพาเวอร์แอมป์ เครื่องขยายเสียง 2 x 800 วัตต์ at 8Ω, 2x 1,050 วัตต์ at 4Ω, Class-D
The Yamaha PX8 Stereo Power Amplifier delivers 800W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company’s PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise.
The on-board DSP functions include a PEQ, a delay, a crossover, and a limiter. They allow for detailed configuration of parameters such as input & output routing, input sensitivity, amp gain, and speaker impedance. The D-Control multi-band dynamic processor delivers a clear and consistent sound at any output level by shaping the frequency response of each speaker for either front-of-house or monitor configurations.
The Configuration Wizard helps save time during setup by assigning optimized speaker settings that match your system configuration. It can be used in basic mode for quick setup or advanced mode for more precise control over DSP parameters. You can store up to eight presets, which can be saved to a USB drive for use with other amplifiers and setups.
For secure operation, the panel-locking function ensures that your settings remain safe. With its sturdy frame and carrying handle, the PX8 is built to withstand extended road use.
Features:
- Class-D amplifier engine with single custom LSI chip and PLL technology
- Configuration Wizard allows for configuration of the system by assigning optimized speaker settings which can be saved as presets
- Digital routing of inputs & output (dual, parallel, single & SUM)
- DSP functions include PEQ, crossover, filters, delay & limiter, accessed via an LCD display
- D-Contour multi-band dynamic processing shapes the frequency response of speakers for specific applications
- Basic mode for quick setup and Advanced mode for more precise control
- Flexible connectivity with XLR & 1/4″ TRS inputs and binding post, SpeakON & 1/4″ TS outputs
- Presets can be saved to USB drive for use with other amplifiers and setups, Panel-locking function to keep settings safe
- Two 16-step variable-speed fans, Lightweight chassis
Specifications เพาเวอร์แอมป์
PX8220V-240V modelsOutput power; 1kHz Non-clip 20msec Burst Both channels driven8Ω800W x 24Ω1050W x 22Ω600W x 28Ω/Power Boost Mode-4Ω/Power Boost Mode-General specificationsSampling frequency rateInternal48kHzA/D D/A ConvertersAD/DA: 24-bit linear, 128 times over samplingVoltage Gain/Sensitivity8Ω Volume max32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu)8Ω Volume max /Power Boost mode-Input impedance20kΩ (Balance), 10kΩ (Unbalance)I/O ConnectorsLine InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clampIndicatorsPOWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off featureProcessorsInput summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)Latency1.5 msec (Analog Input to Speakers)Presets8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)Protection circuitLoad protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)Amplifier classClass D, Balanced output circuit (BTL)Cooling16 step variable speed fan x 2, front to rear airflowPower requirementsDepending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.Power consumption280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)DimensionsW480mm (18-7/8")H88mm (3-7/16"): 2UD388mm (15-2/8")Net weight7.2 kg (15.87 lbs)AccessoriesUSB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1OthersOperating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°Cข้อมูลจำเพาะทั่วไปค่ารวมความเพี้ยนของเสียง0.1% (1kHz, 10W), 0.3% (1kHz, Half power)ความถี่ในการตอบสนอง±1.0dB (1W, 8Ω, 20Hz to 20kHz)อัตราส่วน S/N101dB (A-weighted, 8Ω, Gain setting = +14dBu)CrosstalkLess than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)อินพุต โวลเทจ สูงสุด+24dBuตัวต่อเชื่อม I/Oสปีกเกอร์ เอาต์พุต พอร์ตNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2วงจรป้องกันแอมพลิฟายเออร์ โปรเท็กชันThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)เพาเวอร์ ซัพพลาย โปรเท็กชันThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown