YAMAHA Tio1608-Dดิจิตอล สเตจบ๊อกซ์ 16 Input 8 Output 16 Mic
รหัสสินค้า : Tio1608-D
| ราคา |
64,600.00 ฿ 76,000.00 ฿ (-15%) |
| จำนวนที่จะซื้อ | |
| ราคารวม | 64,600.00 ฿ |
สินค้าไม่เพียงพอ
สินค้าหมด
รายละเอียดสินค้า
YAMAHA Tio1608-D ดิจิตอล สเตจบ๊อกซ์ 16 Input 8 Output 16 Mic
- Stage Box I/O 16 in, 8 out, (XLR) สำหรับ TF Series
- รองรับการใช้งานพร้อมกันได้สูงสุด 3 เครื่อง
- Sampling Rate 44.1kHz หรือ 48 kHz
- DANTE network ใช้งานร่วมกับ NY64-D
- 3U size
สเปค
Tio1608-D
Rio3224-D
Rio1608-D
Ri8-D
Ro8-D
Sound Philosophy
Natural Sound Concept
Grade
D-PRE
Inherit the sublime sound of PM series
–
Sampling Rate
44.1/48kHz
44.1/48/88.2/96kHz
Indicators
+48V
Sig, Peak, +48V
Sig
Gain Compensation
N/A
Supported
–
HA Control Redundancy from CL/QL consoles
N/A
(Primary only)
Supported
–
Controllability from R Remote software
Supported
Maximum number of units using HA remotes per system
Up to 3
Up to 8
–
AD8HR mode (HA control from M7CL and LS9)
N/A
Supported
–
Analog Inputs
16
32
16
8
0
Analog Input Connector
Combo Jack
XLR-3-31 Type
–
Analog Outputs
8
16
8
0
8
AES/EBU Outputs
0
8 (4ST)
0
0
0
AC Inlet
Normal
V-Lock Type
Heights
2U
5U
3U
1U
1U
General Specifications
General specifications
Tio1608-D
Sampling frequency rate
External
44.1kHz or 48kHz
Total harmonic distortion
Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz
Frequency response
+0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz
Dynamic range
108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter
Hum & noise level
Equivalent input noise
-128dBu, Gain=+66dB *Measured with A-weighting filter
Residual output noise
-88dBu, ST master off *Measured with A-weighting filter
Crosstalk
-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz
Heat dissipation
100-240V, 50/60Hz, 43.5kcal/h
Power requirements
100-240V, 50/60Hz
Power consumption
50W
Dimensions
W
480mm (18-7/8″)
H
88mm (3-4/8″)
D
364mm (14-3/8″)
Net weight
5.7kg (12.6lbs)
Accessories
Owner’s Manual, Power Cord(2.5m), Rubber stoppers(4)
Others
Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃
Analog Input Characteristics
Input Terminals
GAIN
Actual Load
Impedance
For Use With
Nominal
Input Level
Connector
Balanced /
Unbalanced
Sensitivity*1
Nominal
Max. before clip
INPUT1-16
+66dB
7.5kΩ
50-600Ω Mics &
600Ω Lines
-82dBu (61.6μV)
-62dBu (0.616mV)
-42dBu (6.16mV)
Combo Jack (XLR-3-31 type *2
or TRS phone *3)
Balanced
-6dB-10dBu (245mV)+10dBu (2.45V)+30dBu (24.5V)
In these specifications, 0dBu = 0.775Vrms.
+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain.
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
Analog Output Characteristics
Output Terminals
Actual Source
Impedance
For Use With
Nominal
Output Level
Connector
Balanced /
Unbalanced
Nominal
Max. before clip
OUTPUT 1-8
75Ω
600Ω Lines
+4dBu (1.23 V)
+24dBu (12.3V)
XLR-3-32 type*1
Balanced
In these specifications, 0dBu = 0.775Vrms.
*1.1: GND,2: HOT, 3: COLD
